GREEN TECHNOLOGY AND SUSTAINABLE DEVELOPMENT 1
PREFACE
CONTENTS
NUMERICALLY STUDY EFFECTIVEN ESS OF CONTROL SURFACE ON
A PHANTOM-NODE METHOD FOR PREDICTING FATIGUE
A LOCKING-FREE STABILIZED MESHFREE METHOD FOR
THE FINITE ELEMENT METHOD FOR AERODYNAMIC INSTABILITY
THE IMPLICIT DANGER OF SYSTEM OF VU GIA - THU BON STEPPING
THE NUMERICAL SIMULATION OF HEAT TRANSFER AND FLUID FLOW
BEARING CAPACITY OF FOOTING STRIP RESTING ON SLOPE USING
INTEGRATION OF RENEWABLE ENERGY TECHNOLOGY IN GREEN
IN-PLANE AND OUT-OF-PLANE STIFFNESSES OF THE HOLLOW
THE MULTI-MODE TECHNIQUE FOR AERODYNAMIC INSTABILITY
EFFECT OF AGGREGATE TYPE ON THE PROPERTIES OF POROUS
APPLICATION OF TECHNOLOGY STABIPLAGE IN THE MITIGATION
A STUDY ON SOLUTION FOR “GREEN MATERIAL” TECHNOLOGY
IMPROVED TRANSVERSE SHEAR ST IFFNESS OF THE FUNCTIONALLY
A NUMERICAL AND EXPERIMENTAL STUDY
SOME PROBLEMS OF ESTIMATING THE DRILLED SHAFT AXIAL
USING 2D WAVELET TRANSFORM TO IDENTIFY CRACK IN FUNCTIONALLY
NUMERICAL SIMULATION OF SATURATED AND NON-SATURATED
ANALYSIS OF A 100W ROTARY STIRLING
DESIGN OF AN ULTRASONIC STEE L HORN WITH A BÉZIER PROFILE
A MONOLITHIC FLEXURAL-BASED PR OSTHETIC FOOT FOR AMPUTEE
RESEARCH AND DEVELOPMENT OF THE TECHNOLOGY, EQUIPMENT
IN-PLANE FORCE SENSING OF MICROELECTROMECHANICAL SYSTEMS
A NEW METHOD FOR COLLECTING THE GARB AGE
RESEARCH AND DEVELOPMENT OF BIODEGRADABLE COMPOSITE
ON THE FEASIBILITY OF MQL USING A MIXTURE OF
THE OPTIMAL DESIGN OF COMPOSITE LEAF SPRING FOR LIGHT
APPLICATION OF NUMERICAL SIMULATION TECHNIQUES FOR
DEVELOPMENT OF QUANTITATIVE MACHINE
ULTRASONICALLY ACTUATED SILICON HORN WITH A BÉZIER PROFILE
DESIGN AND MANUFACTURING OF THE UPPER ARM USING POLYMER
SIMULATION OF Sin ? DIAGRAM IN STRESS DETERMINATION OF...
ON BUILDING 3D SUPPORT SYSTEM IN THE SHIPBUILDING PROCESS
A STUDY OF PIPE-CLEANING AND INSPECTION ROBOT
FLOWER ROBOT – USIN G TENDON MECHANISMS
A SILICON ULTRASONIC HORN WITH A BÉZIER PROFILE FOR
MENTHOD IMAGE PROCESSING IN TRAFFIC CONTROL ROBOT
A NEW METHOD FOR PHASE QUANT ITATIVE DETERMINATION FOR
DEVELOPMENT OF THE SIMULTANE OUS MAPPING SYSTEM FOR THE
STRUCTURAL ANALYSIS FOR NANO CERIA USING FOURIER
RESEARCHING, DESIGNIN G AND MANUFACTURING
RESEARCH ON USING SAWDUST, SHAVING FOR
USING IMAGE PROCESSING TO CONTROL TRAFFIC FLOW BASED ON
RESEARCHING, DESIGNING AND MANUFACTURING
AC IMPEDANCE BASED STATE OF CHARGE DYNAMIC MODELING OF
AUTONOMOUS INSPECTION WITH MULTI-LINK ROBOTIC FISH
AUTOMATIC CLEANING SYSTEM FOR CHEMICAL TANKS
DETERMINATION OF INFLUENCE OF ISOTROPY TO ABSORPTION FACTOR...
RESEARCH ON THE APPLICATION OF PHASED ARRAY ULTRASONIC
USING ELECTROOCULOGRAM AND ELECTROMYOGRAM FOR
ENVIRONMENTAL ANNEALING THIN METALLIC WIRE BY PLASMA IN
STUDY ON HALF-WIDTH AND MAXIMUM X-RAY INTENSITY OF
USING NEURAL NETWORK TO PRED ICT THE HEATING-LINE PATHS
A STUDY ON THE PERFORMAMCE OF BIOGAS SPARK IGNITION ENGINES
OPTIMIZATION INTAKE VALVE TIMING IN CAMLESS ENGINE WITH
MODEL AND CONTROL POWER-SPLIT HYBRID ELECTRIC VEHICLE
A CHEMICAL REACTOR NETWORK APPLICATION TO PREDICT THE
EXPERIMENTAL RESEARCH ON FLUIDIZATION OF RICE-HUSK
NUMERICAL APPROACH TO DIMPLE FRACTURE UNDER VERY SHORT
A STUDY ON ENHANCING HEAT TRANSFER EFFICIENCY OF LED
DEVELOPMENT OF A HYBRID MOTORCYCLE HEADLAMP SYSTEM
USING SOLID INDUSTRIAL AND DOMESTIC WASTE AS FUELS TO
A RESEARCH ON MANUFACTURING A ROTARY DRUM CARROT
A FAULT LOCATION SYSTEM FOR TRANSMISSION LINES USING DATA
PROPOSAL OF COMBINED GAS AND STEAM POWER GENERATION
PRINCIPAL GUIDANCE FOR DEVELOPMENT OF MEDIUM VOLTAGE
DESIGN OF THE SOLAR ENERGY SYSTEM FOR THE ELECTRIC TAXI IN
THE POTENTIAL FOR ELECTRICITY GENERATION FROM RICE-HUSK
A CONTRIBUTION TO THE PROBLEM OF NEUTRAL-POINT VOLTAGE
ADVANCED LIGHTNING CURRENT GENERATORS
DESIGN AND IMPLEMENTATION OF A DSP-BASED THREE- PHASE
THE ENERGY MANAGEMENT ACCORDING TO
FORECASTING ENERGY INTENSIT Y WITH FOURIER RESIDUAL
DIFFERENT CHANNEL QUALITY ESTIMATION TECHNIQUES IN
AN OFFSET-BASED PWM TECHNIQUE IN COMMON-MODE
APPLICATION OF A STATIC SYNCHRONOUS SERIES COMPENSATOR
STABILITY ANALYSIS OF POWER TRANSMISSION FROM INTEGRATED
STUDY THE EFFECT OF DISTRIBUTED GENERATION TO THE
IN-SITU 3-D ENVIRONMENT MAPPING EMPLOYING DEPTH IMAGES
A NEW ON-LINE METHOD FOR DETERMINING SWITCHING ANGLES IN
A MEAN THRESHOLD ALGORITHM FOR DETECTION OF HUMAN EYE
DETECTION OF OBSTACLE AND FREESPACE IN AN AUTONOMOUS
APPLICATION OF MATLAB IN THE TECHNO-ECONOMICAL ANALYSIS
RECOGNITION ALGORITHM FOR DEVELOPING A BRAIN- COMPUTER
IMPLEMENTATION OF AN AHB BUS WITH COMBINATION OF THREE
A THREE-PHASE GRID-CONNECTED PHOTOVOLTAIC SYSTEM
CURRENT PASSING THROUGH GROUNDING SYSTEM
APPLICATION OF SEVEN-LEVEL DIODE-CLAMPED MULTILEVEL INVERTER
BIOMASS OF SHORT ROTATION FOREST FOR REDUCING
FREQUENCY SPECTRUM OF STANDARD OSCILLATORY
FE SOLUTION OF TEMPERATURE DISTRIBUTION AND
APPLICATIONS OF MAXWELL-BOLTZMANN STATISTICS TO STUDY
R*-TREE-BASED METHOD FOR DISCOVERING APPROXIMATE MOTIFS
AN EMPIRICAL INVESTIGATION OF CONSUMERS’ BEHAVIORAL
APPENDIX 1 QUESTIONNAIRE – ENGLISH VERSION
APPLY A MAPPING QUESTION APPROACH IN BUILDING THE
SYNERGETIC APPROACH TO A HA RMONIC DISTURBANCE OBSERVER
AN EFFICIENT SOLUTION FOR PREVENTING DIS’ING ATTACK ON